Cascade Outdoor Services installs commercial and industrial fencing for businesses, industrial yards and property managers in Kansas City, Kansas and across Johnson County, KS. We build solid metal perimeter fencing to the height your city requires, on galvanized steel posts set in concrete, with cantilever gates where trucks and equipment need a wide, clear opening.
Get a commercial fence estimate
Tell us the linear footage, the height your city requires and how many gates you need. Estimates are free.
Request My Free Estimate →Takes about two minutes. Prefer to talk? Call (913) 299-5613.
What commercial fencing does Cascade install?
- Industrial metal perimeter fencing: continuous runs that enclose a lot, yard or work site
- Corrugated metal panel fencing: solid sheeting that screens the property from view
- Galvanized steel posts set in concrete: the structure that carries a full-height solid fence
- Fencing built to city code: height set to what your city requires for the property
- Cantilever gates: wide sliding gates for truck and equipment access, including motorized gates with keypad entry
Recent project: 880 feet of industrial fencing in Kansas City, KS
For a longtime client whose other properties we have also fenced, Cascade built about 880 linear feet of 8-foot industrial metal fencing in Kansas City, Kansas. It is corrugated metal sheeting on 2½-inch galvanized steel posts, every one set in concrete, built to the city’s 8-foot requirement. Two motorized cantilever gates with keypad access, each covering an opening of about 30 feet, are being installed next.
See the full Kansas City, KS industrial fence project →
Why choose corrugated metal panel fencing for a commercial property?
Corrugated metal sheeting forms a solid, continuous wall rather than an open mesh, so the property is screened from view along the whole run. The ribbed profile stiffens each section. On a long perimeter it gives a clean, uniform look for a working industrial or commercial site.
What holds a solid 8-foot commercial fence up?
A solid fence catches wind across its full height, and the posts carry that load. On our Kansas City, KS project we used 2½-inch galvanized steel posts, each set in concrete. The galvanized zinc coating protects the steel against rust, and the concrete anchors each post so the panels stay plumb.
What is a cantilever gate, and when do you need one?
A cantilever gate is a sliding gate that rolls on rollers mounted to posts beside the opening. A counterbalance section extends past the opening, so nothing crosses the driveway. Commercial sites use them when the entrance has to stay fully clear for trucks and equipment.
- Full, clear opening, with no ground track to drive over
- No swing arc to keep clear inside or outside the gate
- Motorized operation is available, so the gate opens and closes under power
- Keypad access lets authorized users enter a code to open and close the gate
Planning a perimeter with gates?
We’ll walk the fence line with you and plan the run, the height and the gate openings together.
Request My Free Estimate →Takes about two minutes. Prefer to talk? Call (913) 299-5613.
How tall does a commercial fence need to be?
Your city’s code and the property’s use set the required height, so confirm it before the fence is planned. On our Kansas City, KS project the requirement was 8 feet, and we built the full perimeter to that height.
What should you have ready for a commercial fence estimate?
- Approximate linear footage of the fence line
- The height your city requires
- How many gates you need, and the width of each opening
- Whether you want gates motorized with keypad access
- Anything along the fence line that needs clearing first, such as old concrete
Where does Cascade install commercial and industrial fencing?
In Kansas City, Kansas and across Johnson County, KS, including Overland Park, Olathe, Lenexa, Shawnee, Leawood and Prairie Village.
One contractor for your commercial property
Cascade also handles commercial and HOA outdoor services such as grounds maintenance, hardscaping and snow and ice management. Several commercial clients have brought us back to fence additional properties. Fencing a home instead? See fence installation and repair.
Frequently asked questions
Does Cascade Outdoor Services install commercial fencing?
Yes. Cascade installs commercial and industrial fencing, including corrugated metal perimeter fencing on galvanized steel posts set in concrete and cantilever gates, for properties in Kansas City, KS and Johnson County.
Where does Cascade install commercial and industrial fencing?
In Kansas City, Kansas and across Johnson County, KS, including Overland Park, Olathe, Lenexa, Shawnee, Leawood and Prairie Village.
What is a cantilever gate?
A cantilever gate is a sliding gate that rolls on rollers mounted to posts beside the opening. A counterbalance section extends past the opening, so no track or wheels cross the driveway and the full opening stays clear for vehicles.
Can commercial gates be motorized with keypad access?
Yes. Cantilever gates can be motorized, with a keypad so authorized users enter a code to open and close the gate. That is the setup on two gates Cascade is installing for a commercial client in Kansas City, KS, each covering an opening of about 30 feet.
How tall should a commercial fence be?
Required height depends on your city’s code and the property’s use. On Cascade’s recent Kansas City, KS project, the city required 8 feet, so the whole perimeter was built to 8 feet.
What should I have ready when I request a commercial fence estimate?
The approximate linear footage, the height your city requires, how many gates you need and how wide each opening is, and anything along the fence line that needs clearing. Then request an estimate through Cascade’s online form or call (913) 299-5613.
Ready to secure your property?
Commercial and industrial fencing in Kansas City, KS, Overland Park, Olathe, Lenexa, Shawnee, Leawood and Prairie Village.
Request My Free Estimate →Takes about two minutes. Prefer to talk? Call (913) 299-5613.